479,90 

556,68 

Aroma dosing pump with bellow technology for application
in steam bath, Rhassoul and steam shower.

The bellow dosing pump comes with a closed, splashproof
plastic housing. The drive is via eccentric gear
motor.

The aroma dosing pump Repetic.Arom A3 is available in
two voltage ranges: 230V AC as CE version and 120V AC
with UL approval.


SKU D01-2022UL Category


Share
Description

Funktion Repetic.Arom A3
The aroma dosing pump is firmly connected to an electrical
voltage network 230V or 120V AC To start the pump
with the cycle “Dosing” and “Standby”, a low voltage signal
(start command) has to be available at the request
cable2 of the aroma dosing pump. This low voltage signal
is delivered by the controller of the steam generator
or steam producer. The dosing quantity and the standby
time are adjusted via DIP switch inside of the aroma dosing
pump. During the “Standby” interval no dosing
takes place.

The cycle “Dosing” and “Standby” is repeated until the
low voltage signal (start command) at the retriever of the
aroma dosing pump is deactivated again.

Scope of supply Repetic.Arom A3
1 x Aroma dosing pump Repetic.Arom A3
1 x Injection nozzle 1/2“
1 x Self-venting cover for Kemitron essence container
1 m Mains cord without mains plug
1 x Request wire for low voltage signal (start command)
1 m Suction hose with fine filter
2 m Pressure hose

Additional information
Weight 4.50 kg
Dimensions 17.65 × 16 × 110 cm
Pump housing

IP65

Electrical connection

120V AC 60Hz

Power consumption

10,2W

Start command via low voltage signal (steam generator)

5 – 24V AC / DC non-isolated

Dosing quantity

0,5 – 8 ml / cycle, adjustable via DIP switch inside the housing

Standby time

1,15 – 20min / cycle adjustable via DIP switch inside the housing

Dosing volume

25ml/min

Delivery pressure

max. 5bar, absolute 4bar

Discharge head

max. 20m

Suction height

max. 1m

Dosing head

transparent

Approval

UL

Privacy Preference Center