623,55 

742,02 

Aroma dosing pump with bellow technology for application
in steam bath, Rhassoul and steam shower. To distribute
the aromatic fragrance in steam bath the fragrance
solution dissolves in the vapor.

The bellow dosing pump comes with a closed, splashproof
plastic housing. The drive is via eccentric gear
motor.

The aroma dosing pump Repetic.Arom A2 is available in
two voltage ranges: 230V AC as CE version and 120V AC
with UL approval.


SKU D01-2021 Category


Share
Description

Function Repetic.Arom A2
The aroma dosing pump is firmly connected to an electrical
voltage network 230V or 120V AC. By pushing the request
button in the steam bath cubicle, the fragrance
program is not started actively. To start the pump with
the cycle “Dosing” and “Standby”, a low voltage signal
has to be available at the request cable2 of the aroma
dosing pump. This low voltage signal is delivered by the
controller of the steam generator or steam producer.

The dosing quantity and the standby time are adjusted
via DIP switch inside of the aroma dosing pump. During
the Standby interval no dosing takes place.

If the request buttonin the steam bath cubicle is pushed
a second time, the fragrance program is being deactivated
and the cycle is stopped.

Scope of supply Repetic.Arom A2
1 x Aroma dosing pump Repetic.Arom A2
1 x Injection nozzle 1/2“
1 x Self-venting cover for Kemitron essence container
1 x Request button for steam bath cubicle
1 x Cover Steel for the request button
in the steam bath cubicle, engraved
1 m Mains cord without mains plug
2 m Request cable for Request button
in the steam bath cubicle
2 m Request cable2 for low voltage signal
1 m Suction hose with fine filter
2 m Pressure hose

Additional information
Weight 4.5 kg
Dimensions 17.65 × 16 × 11 cm
Pump housing

IP65

Electrical connection

230V AC 50/60Hz

Power consumption

10,2W

Start command via low voltage signal (fragrance program)

5 – 24V AC / DC non-isolated or potential-free in the steam cubicle

Start command via low voltage signal (steam generator)

5 – 24V AC / DC non-isolated

Dosing quantity

0,5 – 8 ml / cycle, adjustable via DIP switch inside the housing

Standby time

1,15 – 20min / cycle adjustable via DIP switch inside the housing

Dosing volume

25ml/min

Delivery pressure

max. 5bar, absolute 4bar

Discharge head

max. 20m

Suction height

max. 1m

Dosing head

transparent

Approval

CE